[. . . ] Note: These instructions apply to different models of the MacBook (13-inch) portable computer. While some models may look slightly different from the one shown in the illustrations, the steps for all models are the same. Backing Up Your Data Warning: Before replacing your hard drive, make sure you back up all data on the drive. Tools Required The following tools are required: Clean, soft, lint-free cloth · Coin · Phillips #1 screwdriver (preferably with a long handle) · Stiff, plastic, nonmagnetic card (such as a library card) · Opening the Computer 1. Warning: Always shut down the computer before opening it to avoid damaging its internal components or causing injury. [. . . ] Warning: Always shut down the computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. Wait 30 minutes to allow the computer's internal components to cool. Unplug all external cables from the computer except the power cord. 2. Warning: The power supply in your computer is a high-voltage component and should not be opened for any reason, even when the computer is off. If the power supply needs service, contact your Apple reseller or Apple Authorized Service Provider. 6. 7. Lift out the battery from the battery bay. MacBook (13-inch) Hard Drive 8. Touch a metal surface inside the battery bay to discharge any static electricity. Important: Always discharge static before you touch any parts or install any components inside the computer. Insert the Mac OS X Install Disc 1 that came with your computer. MacBook (13-inch) Hard Drive 3. 5. Double-click "Install Mac OS X and Bundled Software. " Follow the onscreen instructions. After selecting the destination disk for installation, continue following the onscreen instructions. Your computer may restart and ask you to insert the next Mac OS X Install disc 2. Note: If you want to restore Mac OS X on your computer to the original factory settings, click Options in the "Select a Destination" pane of the Installer, and then select "Erase and Install" . Installing Applications 1. To install just the applications that came with your computer, follow the steps below. Double-click "Install Bundled Software Only. " Follow the onscreen instructions. After selecting the destination disk for installation, continue following the onscreen instructions. Your computer may restart and ask you to insert the next Mac OS X Install disc 2. Apple Computer, Inc. [. . . ] Double-click "Install Bundled Software Only. " Follow the onscreen instructions. After selecting the destination disk for installation, continue following the onscreen instructions. Your computer may restart and ask you to insert the next Mac OS X Install disc 2. Apple Computer, Inc. [. . . ]